Nonlinear elastic constitutive relations of residually stressed composites with stiff curved fibres

Applied Mathematics and Mechanics - Mechanical models of residually stressed fibre-reinforced solids, which do not resist bending, have been developed in the literature. However, in some residually...     

给定度序列图的覆盖成本和反向覆盖成本的研究

具有n个顶点且度序列为(m,2,…,2,1,…,1)(1的重数为m)的连通图不止一个(这些图均为树),而每个树对应唯一一个段序列(l₁,l₂,…,l_m).通过对任意一树移动最长段的悬挂点到最短段悬挂点的方式得到另一树,比较前后两树的覆盖成本和反向覆盖成本,给出了具有最小覆盖成本和反向覆盖成本的极树,并且进一步给出了取得最小覆盖成本和反向覆盖成本的顶点.     

汽配件颜色喷涂顺序问题的TSP转化与建模

汽配件颜色喷涂顺序问题通常以生产线上相邻汽配件颜色切换次数少为最优目标,以进一步降低生产成本.该类问题具有所有汽配件都必须喷涂一次且只喷涂一次的特点,为此提出了TSP转化与建模的方法.将待喷涂汽配件定义为TSP顶点,任意两个待喷涂汽配件的颜色切换定义为顶点的距离,仿照TSP问题构建0-1规划模型;类似于顶点距离,将某些汽配件的颜色或类别不相邻要求定义为0-1矩阵,巧妙地构造了喷涂生产的约束条件.该建模方法简单快速,通用性高,适用于具有类似特点的各类生产实践问题.     

紫色球杆菌视紫红质光谱特性的机器学习研究

近年来，机器学习等人工智能技术被应用于蛋白质工程，其在蛋白质结构、功能预测、催化活性等研究中具有独特优势。在未知蛋白质结构的情况下，将蛋白质序列和功能特性与机器学习相结合，基于序列-活性关系（innovative sequence-activity relationship，ISAR）算法，将蛋白质氨基酸序列数字化，用快速傅里叶变换（fast four transform，FFT）进行预处理，再进行偏最小二乘回归建模，可在数据集较少情况下拟合得到最佳模型。通过机器学习对紫色球杆菌视紫红质（gloeobacter violaceus rhodopsin，GR）的突变体蛋白质氨基酸序列与光谱最大吸收波长进行建模，获得了最佳模型。用最佳索引LEVM760106建模得到的确定系数R² 为0.944，均方误差E为11.64。用小波变换进行的预处理，其R² 虽也约为0.944，但E大于11.64，不及FFT进行的预处理。方法较好地解决了蛋白质序列与功能特性之间的数学建模问题，在蛋白质工程中可为预测更优的突变体提供支持。     

More efficient time integration for Fourier pseudospectral DNS of incompressible turbulence

Time integration of Fourier pseudospectral DNS is usually performed using the classical fourth-order accurate Runge-Kutta method or other second- or third-order methods, with a fixed step size. We investigate the use of higher-order Runge-Kutta pairs and automatic step size control based on local error estimation. We find that the fifth-order accurate Runge-Kutta pair of Bogacki and Shampine gives much greater accuracy at a significantly reduced computational cost. Specifically, we demonstrate speedups of 2× to 10× for the same accuracy. Numerical tests (including the Taylor-Green vortex, Rayleigh-Taylor instability, and homogeneous isotropic turbulence) confirm the reliability and efficiency of the method. We also show that adaptive time stepping provides a significant computational advantage for some problems (like the development of a Rayleigh-Taylor instability) without compromising accuracy.     

Spectral estimates for saddle point matrices arising in weak constraint four‐dimensional variational data assimilation

We consider the large sparse symmetric linear systems of equations that arise in the solution of weak constraint four‐dimensional variational data assimilation, a method of high interest for numerical weather prediction. These systems can be written as saddle point systems with a 3 × 3 block structure but block eliminations can be performed to reduce them to saddle point systems with a 2 × 2 block structure, or further to symmetric positive definite systems. In this article, we analyse how sensitive the spectra of these matrices are to the number of observations of the underlying dynamical system. We also obtain bounds on the eigenvalues of the matrices. Numerical experiments are used to confirm the theoretical analysis and bounds.     

A molecular fluorophore in citric acid/ethylenediamine carbon dots identified and quantified by multinuclear solid-state nuclear magnetic resonance

The composition of fluorescent polymer nanoparticles, commonly referred to as carbon dots, synthesized by microwave-assisted reaction of citric acid and ethylenediamine was investigated by ¹³C, ¹³C{¹H}, ¹H─¹³C, ¹³C{¹⁴N}, and ¹⁵N solid-state nuclear magnetic resonance (NMR) experiments. ¹³C NMR with spectral editing provided no evidence for significant condensed aromatic or diamondoid carbon phases. ¹⁵N NMR showed that the nanoparticle matrix has been polymerized by amide and some imide formation. Five small, resolved ¹³C NMR peaks, including an unusual ═CH signal at 84 ppm (¹H chemical shift of 5.8 ppm) and ═CN₂ at 155 ppm, and two distinctive ¹⁵N NMR resonances near 80 and 160 ppm proved the presence of 5-oxo-1,2,3,5-tetrahydroimidazo[1,2-a]pyridine-7-carboxylic acid (IPCA) or its derivatives. This molecular fluorophore with conjugated double bonds, formed by a double cyclization reaction of citric acid and ethylenediamine as first shown by Y. Song, B. Yang, and coworkers in 2015, accounts for the fluorescence of the carbon dots. Cross-peaks in a ¹H─¹³C HETCOR spectrum with brief ¹H spin diffusion proved that IPCA is finely dispersed in the polyamide matrix. From quantitative ¹³C and ¹⁵N NMR spectra, a high concentration (18 ± 2 wt%) of IPCA in the carbon dots was determined. A pronounced gradient in ¹³C chemical-shift perturbations and peak widths, with the broadest lines near the COO group of IPCA, indicated at least partial transformation of the carboxylic acid of IPCA by amide or ester formation.     

通过超宽139La固体核磁共振波谱研究层状La(OH)2NO3

层状稀土氢氧化物是一类新型的稀土功能材料，本文采用固体核磁共振（SSNMR）方法研究了同时具备离子交换能力和非线性光学特性的层状La（OH）₂NO₃化合物，探讨了通过四极核CPMG（QCPMG）脉冲序列和变频谱图采集获取超宽¹³⁹La SSNMR谱图的方法，并描述了适用于此类实验的滤波方程和谱图重建方法.重建谱图同时包含四极核中心跃迁和卫星跃迁信息，本文使用QUEST软件对超宽¹³⁹La NMR谱图进行了模拟，获取的四极耦合常数C_Q和非对称因子η_Q均与CASTEP密度泛函理论计算值高度吻合.SSNMR实验结果证实层状La（OH）₂NO₃化合物属于非中心对称结构（P2₁），解决了对其结构长期以来存在的争论.     

Rapid and Scalable Access to Sequence-Controlled DHDM Multiblock Copolymers by FLP Polymerization

An immortal N-(diphenylphosphanyl)-1,3-diisopropyl-4,5-dimethyl-1,3-dihydro-2H-imidazol-2-imine/diisobutyl (2,6-di-tert-butyl-4-methylphenoxy) aluminum (P(NIⁱPr)Ph₂/(BHT)AlⁱBu₂)-based frustrated Lewis pair (FLP) polymerization strategy is presented for rapid and scalable synthesis of the sequence-controlled multiblock copolymers at room temperature. Without addition of extra initiator or catalyst and complex synthetic procedure, this method enabled a tripentacontablock copolymer (n=53, k=4, dp_n=50) to be achieved with the highest reported block number (n=53) and molecular weight (M_n=310 kg mol⁻¹) within 30 min. More importantly, this FLP polymerization strategy provided access to the multiblock copolymers with tailored properties by precisely adjusting the monomer sequence and block numbers.